{"title":"Red Pig Originals","description":" ","products":[{"product_id":"potting-trowel","title":"Potting Trowel","description":"A trowel that places your hand down and away from a potted plant instead of up and in. This minimizes damage to tender (i.e. begonia) or brittle (i.e. fuchsia) specimens. The shallowly cupped, 2-inch wide blade is easily worked along the inside surface of the pot. Our trowels are flat to start with and then cupped. The measurement is from the backside of the trowel, not across the front. Like all of our trowels, this tool is built for a lifetime or two of service.               ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801299906852,"sku":"SR-S007","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/potting-trowel-front.jpg?v=1775927380"},{"product_id":"sweeder","title":"Sweeder","description":"Inspired by a Scandinavian tool known as a \"Fid\", this trowel has a deeply cupped blade that tapers at the end. It is very useful for extracting deep tap roots. The blade has several deep indentations spaced one inch apart. Dump a packet of small seeds into the top of the blade and then tap gently with your finger and the seeds slide down the blade's trough, stalling at the indentations and, thereby, dispensing one or two at a time instead of all at once Beats dispensing seeds from the palm of your sweaty hand. A great trowel for working in crevices and rock gardens. About 14 inches long.            ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801300070692,"sku":"SR-S008","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/sweeder-front.jpg?v=1775927399"},{"product_id":"rockery-trowel","title":"Rockery Trowel","description":"Rock gardening involves planting in small crevices and tight spaces where a wide trowel just won't fit. This trowel has a sharp, one-inch wide blade and is suitable for installing plants or extracting weeds from the most confined cracks and crevices. Our trowels are flat to start with and then cupped. The measurement is from the backside of the trowel, not across the front.          ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801300201764,"sku":"SR-S009","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/rockery-trowel-tight-spaces-blade-hand-forged-tool-for-gardeners-2.jpg?v=1775927417"},{"product_id":"dutch-bulb-setter","title":"Dutch Bulb Setter","description":"Garden trowels evolved from Mason's trowels. Before they became cupped, garden trowels looked like this one which is still used in Holland for setting bulbs. The blade is a stout 1\/8\" thick forge-welded to the shank and sharpened all along both of its edges. If you start ground covers in traditional flats (as opposed to celled plastic trays) you'll find this bulb setter is excellent for slicing and setting starts. It's also useful for dividing clumps of iris and similarly rooted species.     ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801300332836,"sku":"SR-S019","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/dutch-bulb-setter.jpg?v=1775927434"},{"product_id":"2-1-2-inch-small-trowel","title":"2 1\/2-Inch Small Trowel","description":"Our smallest general purpose trowel is shorter overall than our larger models and has a blade that is 1\/2-inch narrower and 1 inch shorter than our medium trowel. For people with small hands. Like our medium trowel, this one has a shank forged from 7\/16\" diameter steel. Our trowels are flat to start with and then cupped. The measurement is from the backside of the trowel, not across the front. Trowels in the photo are from left to right; Large 4\"; Medium 3\"; Small 2 1\/2\"; and xSmall 2\". The trowels have their own number and are located under \"Digging\".       ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801300431140,"sku":"SR-S011","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/trowel-small.jpg?v=1775927452"},{"product_id":"hole-about","title":"Hole About","description":"Identical to our largest hand forged trowel except with a deeply cupped blade that is sharpened all the way up both sides making it useful for quickly coring a hole for setting out bedding plants. Unlike most transplant trowels, ours comes without depth markings on the blade surface. Why? Because I've never seen anyone use the depth markings on trowels that have them. Most gardeners can tell one inch from two or three and your bulbs won't croak if you bury them a half or quarter inch too deep or too shallow                 ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801300693284,"sku":"SR-S014","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/hole-about-trowel.jpg?v=1775927472"},{"product_id":"4-inch-large-trowel","title":"4-Inch Large Trowel","description":"\u003ch2\u003eOur largest traditional garden trowel \u003c\/h2\u003e\n\u003cdiv\u003eThe blade tapers from 4 inches wide down to a sharp point and is knife-sharp all along its curved edges. The blade is forged from saw steel and holds a good edge even in rocky and sandy soils. The shank is made of half-inch diameter rod hammered to an ovoid cross-section for greater strength. The top of the shank is hammered square and inserted 3 inches deep into a long-ferruled hickory handle, then riveted so that it will never come out. You won't scrape your knuckles when scooping, because the shank has an offset. Our trowels are flat to start with and then cupped. The measurement is from the backside of the trowel, not across the front. Trowels aren't made any better or stronger than this.  Trowels in the photo are from left to right; Large 4\"; \u003ca href=\"\/products\/3-inch-medium-trowel\" target=\"_blank\" rel=\"noopener\"\u003eMedium 3\"\u003c\/a\u003e; \u003ca href=\"\/products\/2-1-2-inch-small-trowel\" target=\"_blank\" rel=\"noopener\"\u003eSmall 2 1\/2\"\u003c\/a\u003e; and \u003ca href=\"\/products\/2-inch-x-small-trowel\" target=\"_blank\" rel=\"noopener\"\u003ex-Small 2\"\u003c\/a\u003e. The trowels each have their own number and are located under \u003ca href=\"\/collections\/digging-tools\" target=\"_blank\" rel=\"noopener\"\u003e\"Digging\"\u003c\/a\u003e.\u003c\/div\u003e","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801300791588,"sku":"SR-S013","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/trowel-large.jpg?v=1775927490"},{"product_id":"3-inch-medium-trowel","title":"3-Inch Medium Trowel","description":"Our mid-size trowel is made for several lifetimes of service, just like our biggest trowel. It's just a bit narrower at 3\" and has a shank of 1\/2\" diameter rod, significantly more substantial than other forged trowels. Designed for heavy duty planting and weeding. This trowel is suitable for people with mid-sized hands and average strength. Our trowels are flat to start with and then cupped. The measurement is from the backside of the trowel, not across the front. \u003cdiv\u003eTrowels in the photo are from left to right; Large 4\"; Medium 3\"; Small 2 1\/2\"; and x-Small 2\". The trowels have their own number and are located under \"Digging\".\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801301020964,"sku":"SR-S012","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/medium-trowel-hand-forged-tool-for-gardeners.jpg?v=1775927507"},{"product_id":"ball-weeder","title":"Ball Weeder","description":"A Victorian invention, Ball Weeders have a two pronged fork protruding from a 2 1\/2-inch diameter knob at the base of a short handle. While effective at prying taprooted weeds such as dandelions, they are also useful for removing weeds with spreading roots. The ball is an excellent fulcrum that gives you leverage even when the ground is soft or wet. Weeders with narrow, strap-like fulcrums penetrate soft, wet surfaces and fail to give leverage. The one shortcoming of traditional ball weeders is their short handle. They give you a great fulcrum but not much of a lever. Our Ball Weeder has a full 10 inches of shaft and handle above the ball, giving a many fold increase in mechanical advantage. The forged head is strong enough and long enough to grab mature taproots by the shoulder and pop them out of the ground with ease.            ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801301086500,"sku":"SR-W001","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/ball-weeder-garden-tool-front.jpg?v=1775927524"},{"product_id":"weed-yank","title":"Weed Yank","description":"This is a light duty weeder and cultivator of our own design, although I wouldn't be surprised if someone, somewhere, sometime in the past had come up with the same thing. To use this tool, you just swing it so that the curving tines enter the ground just on the far side of a weed. Then jerk. Out comes the weed, roots and all. While this isn't the tool for overgrown, deeply rooted weeds -- the direct pull requires too much strength -- it's fine for the little weeds. If you get a weed a little bigger than normal, reverse your grip, push away and use the curve in the neck for added leverage. It's also a great little cultivator, especially for narrow spaces.             ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801301217572,"sku":"SR-W002","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/weed-yank-pull-weeder-steel-gardening-tool-side.jpg?v=1775927543"},{"product_id":"warren-hoe","title":"Warren Hoe","description":"This is a small, one hand version of the larger Warren hoe that is common around vegetable gardens. The smaller version was made during the 1930-1950 era. Bob had one from his personal collection of antique tools on display in the old store. So many people tried to buy it that we began making them. It's a nice tool for working in vegetable beds, making little furrows and slicing or pricking out weeds. The blade is a bit wider than a V-hoe--4 inches versus two--and about half the size of the blade on a full size, pole mounted Warren hoe.            ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801301446948,"sku":"SR-H008","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/warren-hoe-furrower-for-vegetable-planting-hand-made.jpg?v=1775927561"},{"product_id":"v-hoe","title":"V-Hoe","description":"This is a pattern of tool that dates back to the late 1800's--maybe before. The V-shaped blade penetrates soil easily for four to six-inch deep cultivating. The point can be used to prick out weeds. Tilt the blade left or right and use the sharpened edges to slice away weeds or scrape soil. Most often seen on a five foot handle, the V-hoe also does yeoman service in this shorter 14-inch version. The long, curving shank of our hand V-hoe is made of 7\/16\" steel and enables reaching around and behind plants to decapitate weeds.     \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe tool is also available on 18\" handles for working at raised beds and on long handles for working while standing. See related tools below.\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801301807396,"sku":"SR-H003","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/v-hoe-hand-entire.jpg?v=1775927579"},{"product_id":"root-hook","title":"Root Hook","description":"When you have potted plants you inevitably have pot bound plants. This tool, used in Bonsai, is for prying and teasing loose pot bound roots. Rather than slicing them with a knife, further traumatizing an already stressed plant, gently pull the roots apart with the root hook. Your plant will recover much faster from this type of handling. If you have more than a few plants in pots, this is an essential tool.       ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801302102308,"sku":"SR-M011","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/root-hook-entire.jpg?v=1775927596"},{"product_id":"hazeltine-weeder-hot-bed-weeder","title":"Hazeltine Weeder (Hot Bed Weeder)","description":"Once an extremely popular tool, the Hazeltine was designed for weeding in hot beds. (A hot bed, oddly, is a cold frame containing a soil mix heavy with heat producing manure.) A steel strap of one-inch width is forged and then sharpened along both sides and across the front. It is then bent at four points producing a sort of question mark (?) shape with one, two, three and four-inch cutting edges. You select the edge segment that suits the spacing between plants and slice away weeds. An excellent tool for weeding among your plants in amended soils, whether in a hot bed, a cold frame or outdoors. Especially useful in a vegetable garden or among regular rows of plants being propagated for setting out.        ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801302692132,"sku":"SR-W003","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/hazeltine-hotbed-weeder-entire.jpg?v=1775927616"},{"product_id":"hand-rake","title":"Hand Rake","description":"Small, steel head rakes for one-hand use were once common. Not anymore. And the few on the market have heads poorly fastened to their handles. This seven-tine rake has its head welded to a foot long shank that is set four inches deep into its hickory handle and riveted in place. Use it to fine the soil of a newly cultivated bed, to loosen compacted soil, to work amendments into the soil around plants and to firm up beds after seeding. We offer two different versions of this rake. The first is a shorter wide headed version that measures around 14-15 inches in length and the head is about 6 1\/2 inches wide. The second is a longer, narrower headed version around 18 inches in length with a head around 4 inches wide.","brand":"Red Pig Tools","offers":[{"title":"Wide head (6.5 in) approx 14-15 inches long","offer_id":52801303150884,"sku":"SR-C004","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Narrow head (4 in.) approximately 18 inches long","offer_id":52801303183652,"sku":"SR-C004-L","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/hand-rake-top.jpg?v=1775927633"},{"product_id":"bulb-planter","title":"Bulb Planter","description":"\u003ch2\u003eCreate consistent holes for bulbs in semi-cultivated soil\u003c\/h2\u003e\u003cdiv\u003eBulb planters are not intended for coring holes in hard-packed, dried-out clay. You should till and amend a bed to a chocolate cake consistency and then use the bulb planter to cut nice round holes. Trouble is, most of us don't do that. We buy a light duty planter and use it to sink holes in dirt that's only slightly less hard than concrete. Then we cuss when the tool collapses in our hand or falls apart. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eSo, here's a bulb planter that's made to hold up under severe abuse. The one-eighth inch thick, tubular blade is sharp. (And should be kept sharp.) The handle brackets are forged out of 3\/8x1\/2\" steel and the ash wood handle is extra thick. You should still prep the planting bed properly; but if you don't, at least you won't destroy the tool or your hands.  Outer diameter of the tube for the large is 4 1\/2 inches, while the small\/medium is 3 inches.\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Large","offer_id":52801303511332,"sku":"SR-M012-LG","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Small\/Medium","offer_id":52801303544100,"sku":"SR-M012-SM","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/bulb-planter-side-top-view-small-large.jpg?v=1775927667"},{"product_id":"half-moon-hoe","title":"Half Moon Hoe","description":"Our Half Moon Hand Hoe is a pattern popular in Europe and the Far East. The 7\/16 inch diameter shank is bent into a swan neck shape to bring the blade into a position almost parallel with the ground. Combined with its very sharp edge this alignment makes the tool excellent for weeding. It's not much of a dirt mover, though. The blade is attached to the shank at its center so this tool can be used effectively by both right and left handers.       ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801304527140,"sku":"SR-H004","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/half-moon-hoe-top-gardening-tool.jpg?v=1775927686"},{"product_id":"forged-dibble","title":"Forged Dibble","description":"A dibble (or \"dibber,\" either word is proper.) is the world's oldest garden tool--a sharp stick. Farmers and gardeners used to make their own dibbles, either \"L\" or \"T\" shaped, out of appropriately configured branch crotches. Since the early 1900's dibbles have been manufactured mostly out of wood with a metal cone around the tip. The best dibble ever made, bar none, was produced for many years by a forge in Bangor, Maine; the Snow and Nealley Company. When they were sold a few years ago, the new owner discontinued their venerable garden tool line. So, I decided to reprise their dibble. The bullet-shaped shaft is hand forged from one-inch diameter bar stock. The grip is hammered from half-inch bar and fitted with a hardwood cob. You don't have to push this tool into the ground--just hold on as it drops. It will easily penetrate almost any soil. Then wiggle it around to make a hole the size you want for your seeds; bulbs or seedling plants.          ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801304658212,"sku":"CU-M013","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/forged-steel-dibble.jpg?v=1775927704"},{"product_id":"finger-hoe","title":"Finger Hoe","description":"This single tine cultivator will penetrate deeply into the narrow spaces between closely set plants. The sharpened sides of the lozenge-shaped tip can be used for occasional weed slicing, but this tool is intended primarily for tillage. Forged from 7\/16\" diameter rod and riveted securely to the handle, this tool can open up the heaviest soil with ease.      ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801305018660,"sku":"SR-H000","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/finger-hoe-cultivator-single-tine-tillers.jpg?v=1775927721"},{"product_id":"diamond-hoe","title":"Diamond Hoe","description":"\u003cp\u003eThe Diamond Hoe is an excellent and versatile scuffle hoe for light to medium duty removal of both emerging annual and re-emerging perennial weeds. You use the four sharpened sides to slice through weed roots just below the soil. And the pointed ends of the diamond are perfect for nicking out weeds that are so close to a desirable plant that you may do unwanted damage. While the \u003ca href=\"\/products\/diamond-hoe-long-handle\" target=\"_blank\" rel=\"noopener\"\u003elong handled version\u003c\/a\u003e of this tool has been popular for many years in the Netherlands, and recently so here, no one has made a short handled version of it...until now.\u003c\/p\u003e","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801305182500,"sku":"SR-H012","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/diamond-hoe-cut-weeder.jpg?v=1775927739"},{"product_id":"crows-foot-small","title":"Crows Foot- Small","description":"This is the smaller of our two crows foot cultivators, it measures about 11 - 11 1\/2 inches long, the head is about 3 - 3\/12 inches across and is most suitable for use in beds with average to narrow spacing between plants. Use it to break up the soil to form a \"dust mulch\" that helps keep moisture in the soil by slowing evaporation, uproot emerging weed seedlings and work-in fertilizers and amendments. By the way, these tools got their start as nail rakes, dragging nails from a keg or bin into a bag or tray for weighing in old-time hardware stores. (Some still use them.) But they quickly found employment in the garden.       ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801305346340,"sku":"SR-C006","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/crows-foot-cultivator-small-gardening-tool.jpg?v=1775927758"},{"product_id":"crevice-weeder","title":"Crevice Weeder","description":"The most difficult weeding job is to extract plants that take root in the narrow crevices between bricks or in sidewalk cracks. This tool has a thin but strong blade that slips deep into cracks (As deep as 3\") and drags the weed out by its roots. The blade is not sharpened and therefore does not cut the roots, leaving them to throw more growth. (Did you know that trees and vines taking root between building blocks are the greatest threat to ancient ruins -- more damaging than acid rain or human vandalism?)         ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801305575716,"sku":"SR-W004","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/crevice-weeder-crack-narrow-tight-space-tool-hand-forged.jpg?v=1775927778"},{"product_id":"cape-cod-weeder-rt","title":"Cape Cod Weeder Rt","description":"\u003cp\u003eDesigned decades ago by a woman living on Cape Cod (or so it was told). The cape cod weeder was a regional favorite until the late 1980's when Snow \u0026amp; Neally of Bangor, Maine began to market it nationwide. It is now well on its way to ubiquity. Our version adheres closely to the original design albeit with a longer shank and shorter handle. \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWe also forge it a bit thicker for longer life and better performance on overgrown weeds. The tool cuts on both the forward and back stroke -- it's a scuffle hoe -- and can be turned on its side and driven in by its point to nick out weeds snuggled up to valuable plants. Properly made, the cape cod weeder has a slight back angle to the blade that makes it exceptionally effective on the pull stroke. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMoreover, this is a tool that demands to be produced in both left and right handed versions. (I'm very right handed and can't begin to use the Southpaw version. And I bet extreme lefties appreciate having a tool that doesn't feel awkward to use.) (Note: See \u003ca href=\"\/products\/cape-cod-weeder-lft\" target=\"_blank\" rel=\"noopener\"\u003eCape Cod Weeder-Left Handed\u003c\/a\u003e for ordering a left-handed version.)\u003c\/div\u003e","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801305968932,"sku":"SR-W005","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/cape-cod-weeder-cut-garden-tool-right-handed.jpg?v=1775927795"},{"product_id":"bulb-lifter","title":"Bulb Lifter","description":"In Holland, where bulb culture is a virtual religion, a narrow, 2-tine hand fork is used to lift bulbs from the soil without damaging them. Our bulb lifter mimics the classic Dutch design. The single piece head has two tines made of 7\/16-inch round rod that have been forged flat. The tines have a one inch gap between them and are slightly curved top to bottom. This is the proper tool for easing bulbs out of the ground for off-season storage or when thinning crowded plantings.      ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801306198308,"sku":"SR-M008","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/bulb-lifter-front.jpg?v=1775927813"},{"product_id":"fulcrum-weeder","title":"Fulcrum Weeder","description":"Unlike the ubiquitous \"dandelion weeder\" that is really not a weeder at all but an asparagus harvesting knife under an assumed identity. This tool is properly designed to extricate tap rooted weeds without cutting them off. Instead of a shallow, sharp \"V\" notch it has a deep, square-sided notch that grabs the root by its shoulders. And it has a semi-circular bend just behind its tines that gives you a fulcrum for proper levering of the weed. The technique for wielding this weapon is to drive it straight down right next to the tap root or the center of a multi-rooted mass. Then rotate the handle downward to lever out the weed. Our tool, as usual, is a bit sturdier than most -- we forge it from half inch rod instead of 3\/8 or 7\/16.   ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801306493220,"sku":"SR-W007","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/fulcrum-weeder-forked-tool.jpg?v=1775927833"},{"product_id":"hand-hoe-heavy-duty","title":"Hand Hoe, Heavy Duty","description":"Now, that's a Hoe, is the usual comment of someone picking up this beefy tool. The blade and shaft are forged from a single piece of square steel rod.  This hoe weighs in at just under three pounds.  It measures from 23-25-inches long. When you swing this hoe, it's like swinging an axe or hammer. It doesn't take much effort to drive it deep into the ground. The flared blade is sharpened across the bottom and up the sides. It clears a swath about 2-3\" wide. This elegantly simple implement is a workhorse capable of the roughest ground breaking or weeding chores.          \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe size, shape, and weight of this item means we must charge an additional $8 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it.\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Solid Socket \/ 18 inch standard","offer_id":52801306853668,"sku":"ER-H005","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Solid Socket \/ 48 inch","offer_id":52801306886436,"sku":"ER-H005","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Solid Socket \/ 54 inch","offer_id":52801306919204,"sku":"ER-H005","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Solid Socket \/ 60 inch","offer_id":52801306951972,"sku":"ER-H005","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Solid Socket \/ Custom","offer_id":52801306984740,"sku":"ER-H005","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Tang-and-Ferrule \/ 18 inch standard","offer_id":52801307017508,"sku":"ER-H005","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Tang-and-Ferrule \/ 48 inch","offer_id":52801307050276,"sku":"ER-H005","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Tang-and-Ferrule \/ 54 inch","offer_id":52801307083044,"sku":"ER-H005","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Tang-and-Ferrule \/ 60 inch","offer_id":52801307115812,"sku":"ER-H005","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Tang-and-Ferrule \/ Custom","offer_id":52801307148580,"sku":"ER-H005","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/hand-hoes-long-and-short-wood-handles.jpg?v=1775927850"},{"product_id":"asparagus-knife","title":"Asparagus Knife","description":"Asparagus harvesting knives have a wide flat blade with a sharp, shallow \"V\" notch at the tip. They're designed to penetrate beneath the soil and cut an asparagas shoot down where it is blanched and tender. They became America's favorite weed pry by default -- they're vastly more effective than either a screwdriver or a table knife, the usual alternatives. Today they take many forms but only the ones with deep, dull notches are proper weeders. Still, if you prefer the asparagus knife for weeding, ours is as stout a version as you'll find. It's head is hammered wide and thin out of half inch rod. There's a shallow \"V\" notch that's very sharp. And the tool has a double bend several inches above the tip that sends the shaft off at an angle that prevents knuckle scraping and enables sufficient rotation for effective prying.        ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801307345188,"sku":"SR-W009","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/asparagus-knife-hand-forged-sharpened-tool.jpg?v=1775927867"},{"product_id":"crows-foot-large","title":"Crows Foot - Large","description":"This five tine cultivator is shaped like your hand with its tines curved slightly inward. It is designed to scratch the soil shallowly, creating a dust mulch and uprooting weed seedlings in the process. An excellent choice when tilling among plants whose feeder roots are close to the soil surface. Each tine tapers slightly toward the tip. This larger version of our crow's foot cultivator measures about 14 inches long and 4 1\/2 - 5 inches wide and is most suited to gardens with average to wide spacing between plants. A great tool for working fertilizers and amendments into the top inch or so of soil.        ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801308295460,"sku":"SR-C000","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/crows-foot-cultivator-large-gardening-tool.jpg?v=1775927885"},{"product_id":"cape-cod-weeder-lft","title":"Cape Cod Weeder - Lft","description":"\u003cdiv style=\"text-align: left;\"\u003eDesigned decades ago by a woman living on Cape Cod (or so it was told). The cape cod weeder was a regional favorite until the late 1980's when Snow \u0026amp; Neally of Bangor, Maine began to market it nationwide. It is now well on it's way to ubiquity. Our version adheres closely to the orginal design albeit with a longer shank and shorter handle. We also forge it a bit thicker for longer life and better performance on overgrown weeds. The tool cuts on both the forward and back stroke -- it's a scuffle hoe -- and can be turned on its side and driven in by its point to nick out weeds snuggled up to valuable plants. Properly made, the cape cod weeder has a slight back angle to the blade that makes it exceptionally effective on the pull stroke. Moreover, this is a tool that demands to be produced in both left and right handed versions. (I'm very right handed and can't begin to use the Southpaw version. And I bet extreme lefties apreciate having a tool that doesn't feel awkward to use.)\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801308983588,"sku":"SR-W006","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/cape-cod-weeder-left-front.jpg?v=1775927905"},{"product_id":"weeding-fork-long-handle","title":"Weeding Fork (Long Handle)","description":"Before the era of chemical weeding, when slicing, prying and yanking were the weed removal methods of choice, weeding forks were the big guns. Sometimes called spade forks, these tools were used to pry overgrown, tap-rooted perennial weeds such as dandelions, docks and thistles. Almost always two or three-pronged (occasionally, four) they came with or without a tread. Our standard tool for the home gardener is forged from 5\/8\" rod with a 1\/2\" crossbar that doubles as a step for driving the fork deep into the ground and a fulcrum for prying with the stout handle. If you live on rural acreage and eschew Round-Up, Crossbow and other weed killers, the tool for you is forged from a 3\/4\" rod with a 5\/8\" cross bar.  Our standard length of the tool ranges from roughly 57-61\". \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe size, shape, and weight of this item means we must charge an additional $15 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it.\u003cbr\u003e\n\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"home\/lawn (5\/8\")","offer_id":52801309933860,"sku":"LH-W01158","price":100.0,"currency_code":"USD","in_stock":true},{"title":"rural\/acreage (3\/4\" center piece)","offer_id":52801309966628,"sku":"LH-W01134","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/weeding-fork-standup-long-handle-tool-comparison.jpg?v=1775927974"},{"product_id":"forged-berry-hook-long-handle","title":"Forged Berry Hook (Long Handle)","description":"This tool has been around since the Middle Ages when it was used for tree pruning and as a weapon for peasants called to war by their local liege lord. From the 1600's on a version was used for roguing out overgrown berry canes. If you're removing blackberry canes an inch or so in diameter and upwards of 20 feet long, you NEED this tool. The chisel tip is used to cut half way through the base of a freestanding cane. The hook is used to complete the cut and drop the cane AWAY from you instead of ON to you. For canes that are tangled in shrubs or trees, use the chisel to cut through the base of the cane then use the hook to drag the cane from the brush. The long, stout pole keeps you from having a close, personal relationship with thorny stems. Overall length of tool is about 60 inches.      \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe size, shape, and weight of this item means we must charge an additional $10 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it.\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801310261540,"sku":"LH-M016","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/black-berry-hook-head-solid-socket-forged-steel-long-handle.jpg?v=1775927990"},{"product_id":"thinning-hoe","title":"Thinning Hoe","description":"\u003ch2\u003eA time saver for row planting\u003c\/h2\u003eBob's mother-in-law, Liz, used to thin his vegetable seedlings for him. (He's one of those guys who plants every seed in the packet.) Then she got busy with her own garden and quit on him. Kneeling and pricking out seedlings by hand was not a favored activity of Bob or his knees. \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eSo he designed a hoe with a trapezoidal blade. It has one, two, three, and four inch edges. You select the edge that corresponds to the gap you want between plants, then deftly slice out the unwanted ones. Yes, some people use it for other tasks, but what it does best is thinning. (P.S. The excess seedlings are great in salads.) Overall length about 8-10\" \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFor those who would like to use this tool while standing or working at raised bed, see related tools below. You can also use our web search box and search for \"thinning hoe long handle.\" \u003c\/div\u003e \u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801310523684,"sku":"SR-H002","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/thinning-hoe-hand-entire.jpg?v=1775928008"},{"product_id":"root-saw","title":"Root Saw","description":"\u003cdiv\u003eNEW DESIGN: Pictures to be updated soon. The new design for 2026 has 2 large ripping teeth at the front and then most of the body has scalloped teeth\/edge more like a hori hori or a bread knife edge. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003eNever destroy another good pruning saw on roots again. It's thin and brittle and will snap if bent too much. Root cutting is equally hard on hand pruners or loppers. It's easy to catch a pebble between the blade and hook and destroy your $80 Felcos. \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eBob originally designed this root saw for the brutish work of severing tough, fibrous roots of trees and shrubs without breaking. Its blade is 3\/16 inch thick along the back and its teeth are strong and aggressive. It cuts on the pull stroke. When you're spotting plants into a border and need to whack some roots, or when you're trying to stimulate a reluctant wisteria to bloom, this is the tool you want to stick into the ground. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eOur 2026 update keeps the best of the old design - keeping the 2 large ripping teeth - and adds much better performance with a scalloped or bread knife style serration along most of the body. The new designs more than 2Xs the number of cutting teeth overall, meaning they will sever most roots more quickly and easily than the old style.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThis tool works for roots up to about one inch thick, but it is best for those that are thinner. For bigger roots, consider a pulaski or mattock. Our new design comes in one blade length: approximately 10 inches with 16-20 teeth overall.\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801310720292,"sku":"CU-M015","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/root-saw-size-comparison.jpg?v=1775928027"},{"product_id":"2-tine-hand-cultivator","title":"2-Tine Hand Cultivator","description":"It's not hard to find one, three and four tine cultivators. Twos are rare. But a two tine cultivator can be useful. For tilling on both sides of a row of seedlings in one pass, for example. Or for working among plants spaced at moderate intervals, such as bedding plants or tall growing herbs and flowering perennials. So, we forge a light to moderate duty two-tine hand cultivator. It's not designed to work deep, like a finger hoe, or to cover territory quickly, like a three, four or five tine tool. But what it does, it does well.    ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801311080740,"sku":"SR-C001","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/two-2-tine-cultivator-handheld-garden-tool.jpg?v=1775928047"},{"product_id":"3-tine-hand-cultivator","title":"3-Tine Hand Cultivator","description":"Our 3-tine cultivator has its tines arranged in a \"V\" pattern. That makes it easier to pull through the soil than cultivators with all tines in the same plane. Ours is built for heavy duty and is long enough to reach at 21 inches to the rear of a bed. The spade shaped teeth penetrate soil easily and do maximum disturbance. (Tilling is all about stirring things up.)            ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801311342884,"sku":"SR-C002","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/3-tine-cultivator-handheld-best-for-breaking-up-dirt.jpg?v=1775928064"},{"product_id":"broadfork-grelinette","title":"Broadfork (Grelinette)","description":"\u003cp\u003e\u003cspan style=\"font-weight: bold; font-style: italic;\"\u003e\u003ca href=\"\/blogs\/news\/here-are-some-tips-for-choosing-a-broadfork\" target=\"_blank\" rel=\"noopener\"\u003eRead our tips on choosing a broadfork.\u003c\/a\u003e\u003c\/span\u003e Broadforks are two handled forks with long widely spaced tines. They are used to loosen soil deeply without inverting it. Doing so maintains the existing soil structure and minimizes disruption of bacterial life while providing aeration that enhances water and nutrient penetration, root spread. It also serves to counteract the compaction caused by water, gravity and other causes. To wield a broadfork you force the tines straight down into the earth while holding the handles at arms length. You then pull the handles back and rock them breaking, loosening and crumbling the soil. As with all spading, you take small bites. Spits should be about four inches thick for average soil, thinner for heavy ones and never thicker than six inches. Taking large bites with these tools makes them exhausting to use and increases the chance for splayed tines.\u003c\/p\u003e\n\u003cp\u003eBroadforks typically have five to seven tines ranging from 12 to 18 inches in length. They appear under several names including U-bar digger, grelinette, garden digger, deep digger and two-handed fork. Our broadforks differ from others in that the tines have forged spade shaped tips that penetrate compacted soils more easily than the usual chisel points of other tools. The tines exit the cross bar horizontally and then bend downward. That allows them to slightly lift the soil as you pull back.\u003c\/p\u003e\n\u003cp\u003eThe broadfork pictured is a four tine model. It has 14-inch tines. The ash handles are 48 inches long. Overall length is 67 inches. Because we build these forks to order you may specify the number of tines and their length. The price above is for the tool shown. The price for your tool will vary with your specifications. \u003c\/p\u003e\n\u003cp\u003ePlease expect a 2-3 weeks lead time to give us time to make our broadforks to order. The size, shape, and weight of this item means we must charge an additional $20 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it. It will ship in 2 separate boxes, one for the metal fork and one containing handles and hardware needed for assembly. \u003c\/p\u003e","brand":"Red Pig Tools","offers":[{"title":"4 Tine \/ 12 Inches \/ Included: Ships Separately","offer_id":52801311670564,"sku":"LH-F000","price":295.0,"currency_code":"USD","in_stock":true},{"title":"4 Tine \/ 14 Inches \/ Included: Ships Separately","offer_id":52801311703332,"sku":"LH-F000","price":310.0,"currency_code":"USD","in_stock":true},{"title":"4 Tine \/ 16 Inches \/ Included: Ships Separately","offer_id":52801311736100,"sku":"LH-F000","price":320.0,"currency_code":"USD","in_stock":true},{"title":"5 Tine \/ 12 Inches \/ Included: Ships Separately","offer_id":52801311768868,"sku":"LH-F000","price":315.0,"currency_code":"USD","in_stock":true},{"title":"5 Tine \/ 14 Inches \/ Included: Ships Separately","offer_id":52801311801636,"sku":"LH-F000","price":330.0,"currency_code":"USD","in_stock":true},{"title":"5 Tine \/ 16 Inches \/ Included: Ships Separately","offer_id":52801311834404,"sku":"LH-F000","price":340.0,"currency_code":"USD","in_stock":true},{"title":"6 Tine \/ 12 Inches \/ Included: Ships Separately","offer_id":52801311867172,"sku":"LH-F000","price":325.0,"currency_code":"USD","in_stock":true},{"title":"6 Tine \/ 14 Inches \/ Included: Ships Separately","offer_id":52801311899940,"sku":"LH-F000","price":340.0,"currency_code":"USD","in_stock":true},{"title":"6 Tine \/ 16 Inches \/ Included: Ships Separately","offer_id":52801311932708,"sku":"LH-F000","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/broad-fork-four-tine-hand-cultivator-steel-farm-tool.jpg?v=1775928082"},{"product_id":"dutch-hand-hoe-left","title":"Dutch Hand Hoe - Left","description":"Some enterprising archeologist should figure out whether these tools originated in Holland and made their way to Japan or vice-versa. I suspect the latter. The Dutch versions are longer and wider than the ones from Japan. That figures because the Dutch are, generally, a taller population.. What the tools have in common are light, thin blades that are unequally triangular in shape, sharpened on the underside and pitched over to slice almost parallel to the ground. There are both left and right handed versions. The long side of the triangle points to the inside. The Dutch tools seem better for rougher work, the Japanese ones being rather delicate instruments. Like all the Dutch versions I've seen, ours has its blade forge-welded to the shank. (The Japanese ones are usually tack-welded.) Our tool measures from 16-18 inches in length with a four-inch wide blade. Since this tool has a wide, shallow bevel it needs to be honed frequently to maintain its superb slicing ability.    ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801311998244,"sku":"SR-H006","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/dutch-hoe-left-handed-cut-weeder-garden-tool.jpg?v=1775928098"},{"product_id":"dutch-hand-hoe-right","title":"Dutch Hand Hoe - Right","description":"Some enterprising archeologist should figure out whether these tools originated in Holland and made their way to Japan or vice-versa. I suspect the latter. The Dutch versions are longer and wider than the ones from Japan. That figures because the Dutch are generally a taller population What the tools have in common are light, thin blades that are unequally triangular in shape, sharpened on the underside and pitched over to slice almost parallel to the ground. There are both right and left-handed versions. The Dutch tools seem better for rougher work, the Japanese ones being rather delicate instruments. Like all the Dutch versions I've seen, ours has it blade forge-welded to the shank. (The Japanese ones are usually tack-welded.) Our tool measures from 16- 18 inches in length with a six-inch wide blade. Since this tool has a wide, shallow bevel it needs to be honed frequently to maintain its superb slicing ability.        ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801312293156,"sku":"SR-H007","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/dutch-hoe-right-handed-cut-weeder-garden-tool.jpg?v=1775928118"},{"product_id":"american-style-hand-digging-fork","title":"American Style Hand Digging Fork","description":"\u003ch2\u003eA hearty forged hand fork for digging\u003c\/h2\u003e\u003cdiv\u003eIn the USA, the standard kit of hand tools includes a trowel, a 3-tine cultivator, and a fishtail weeder. In merry old England it's a trowel, a dibble and a 3-tine fork. Our three tine fork is a stout one with tines of 7\/16 inch diameter steel hammered and ground to a spear point. The head measures about 4 inches wide (about an inch wider than most.) with 5 inch-long tines (all measurements are approximate - every tool is hand made and will have variation). All three points are in about the same plane so you can easily work along a straight line if necessary.        \u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801312686372,"sku":"SR-C003","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/american-hand-fork-digging.jpg?v=1775928136"},{"product_id":"2-tine-hand-weeding-fork-jekyll-weeder","title":"2-Tine Hand Weeding Fork \/ Jekyll Weeder","description":"Gertrude Jekyll (1843-1932) is firmly ensconced in the pantheon of great gardeners. Her opus, \"Home and Garden\", first published in 1900, contains chapters on The Workshop and The Kinship of Common Tools and includes a tender paean to the pleasure of wielding an old, worn spade. Her favorite weeder was a short handled, two tine fork now commonly called a \"Jekyll Weeder\". Our version is forged from 3\/8-inch diameter rod. The gently curved, sharply pointed and about 8-inch long tines are about an inch apart, leaving about a 5\/8-inch gap between. Overall, the tool is about a foot long. It penetrates soil easily and is used to pry, twist and extract the most stubborn weeds. If you want a sturdier version, request it to be made from 1\/2-inch diameter rod when you order.      ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801315176740,"sku":"SR-W008","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/jekyll-weeder-gardening-tool-front-back-view.jpg?v=1775928166"},{"product_id":"blackberry-hoe-5-lb-head","title":"Blackberry Hoe - 5 lb Head","description":"When Bob and Rita bought their acreage in Boring, Oregon, it came with a generous endowment of Himalayan blackberry, an invader that is to the Northwest what the Kudzu is to the Southeast. Bob spent days grubbing out blackberry thicket, canes, root runs and seedlings. After removing 20-foot-long, one-inch-thick canes from a holly tree he decided that if you're really bad and end up in Hell for eternity, that's probably what the devil makes you do. He used various tools for grubbing out both blackberry and a foot-thick mat of English ivy from the property. \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe lack of a single tool suited to the task led Bob to invent our Blackberry Hoe. The tool combines a four inch wide mattock blade for excavating and cutting roots with a large, V-notched claw. The blade is used to dig out the main crown  and to follow  the spreading roots which sink new taproots every few feet.  The claw is used to uproot each of the outlying taproots as they are encountered. The Blackberry hoe is equipped with a 36-inch long hickory railroad pick handle so you have plenty of levering power. The hoe head is made of 3\/8-inch thick steel. It's a brute of a tool. To extract small blackberry seedlings you swing the tool to drive the mattock blade full depth just at the far side of the seedling. A bit of levering and a hearty tug pulls out a slab of soil including the seedling. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eFor grubbing thickly matted ivy I find the best technique is to use a sharp spade or edging tool to cut the ivy patch into a grid of 2-foot squares. Drive the blade through the roots deep into the soil. Then, starting with the outermost sections of the grid, use the Blackberry Hoe's blade to chop away  the mat of vines flush with the ground. Then use the claw to pry up underground roots. You can use the Blackberry's Hoe's blade for making the initial grid cuts but a spade can be driven deeper and makes a neater job of it. You'll find lots of other uses for a Blackberry Hoe. If you're plagued by industrial size dandelions, burdock and thistle, the tool does an excellent job of roguing them out. As with all bladed tools, sharpen often. Don't wait until the blade is dead dull to file the edge. Instead, work like a butcher, honing frequently to maintain a keen edge.             \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe size, shape, and weight of this item means we must charge an additional $8 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it.\u003c\/div\u003e\n\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Tool head and 36\" Railroad Pick Handle","offer_id":52801316487460,"sku":"CU-M010","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Head Only (No handle)","offer_id":52801316520228,"sku":"CU-M010-HEAD","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Replacement Handle Only","offer_id":52801316552996,"sku":"CU-M010-RHANDLE","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/black-berry-hoe-handle-top-view-sturdy-garden-tool.jpg?v=1775928186"},{"product_id":"2-inch-x-small-trowel","title":"2-Inch X-Small Trowel","description":"\u003ch2\u003eSmall Handled Trowel \u003c\/h2\u003e\n\u003cdiv\u003eDo you have children who like to garden or know someone with very small hands? Then this is the trowel they will love. It's made the same way as our larger trowels with quality material and workmanship. The head measures 2 inches at the widest part by 4 1\/2 inches long. The overall length is about 11 inches. We use the same hickory handle, only the next size down. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHaving a tool that doesn't fall apart or bend for children will hold their interest much longer than one that collapses the first time they use it. Our trowels are flat to start with and then cupped. The measurement is from the backside of the trowel, not across the front.\n\u003cdiv\u003eTrowels in the photo are from top to bottom; \u003ca href=\"\/products\/4-inch-large-trowel\" target=\"_blank\" rel=\"noopener\"\u003eLarge 4\"\u003c\/a\u003e; \u003ca href=\"\/products\/3-inch-medium-trowel\" target=\"_blank\" rel=\"noopener\"\u003eMedium 3\"\u003c\/a\u003e; \u003ca href=\"\/products\/2-1-2-inch-small-trowel\" target=\"_blank\" rel=\"noopener\"\u003eSmall 2 1\/2\"\u003c\/a\u003e; and x-Small 2\". The trowels have their own number and are located under \u003ca href=\"\/collections\/digging-tools\" target=\"_blank\" rel=\"noopener\"\u003e\"Digging\"\u003c\/a\u003e.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801319272740,"sku":"SR-S010","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/trowel-x-small.jpg?v=1775928359"},{"product_id":"heart-spade","title":"Heart Spade","description":"This little spade will be the first tool you grab when it's time to divide up that large bed of perennials such as iris, day lily and agapanthus. Also, useful for setting out small plants. The 4-1\/2 inch by 4-1\/2 inch, pointed blade is sharpened all the way up both sides. The 24-inch handle lets you have a strong grip whether dividing or digging. The original design is from Holland. This heart spade is sometimes referred to as a perennial planter.   \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe size, shape, and weight of this item means we must charge an additional $8 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it.\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801320026404,"sku":"ER-S016","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/heart-spade-splitting-front.jpg?v=1775928396"},{"product_id":"abbott-weeder-long-handle","title":"Abbott Weeder Long Handle","description":"\u003ch2\u003eA great tool for removing overgrown weeds \u003c\/h2\u003e\u003cdiv\u003eThis is a great tool for the average urban and suburban gardener. It will make short work of grubbing out stubborn overgrown weeds. Size of the head on this tool varies, but most often is approximately 8-10\" (l) x 1-1 1\/4\"(w) x 7\/16\" thick.  The gap between claw prongs is roughly 3\/4\" at the widest point. And we mount it on a 48\" or 54\" handle. For other handle lengths select from the drop down menu before check out.\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe size, shape, and weight of this item means we must charge an additional $10 shipping fee to our flat rate shipping rate to accommodate for the actual cost of shipping it.\u003c\/div\u003e \u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"18” Handle \/ Tang-and-Ferrule","offer_id":52801331691812,"sku":"LH-W014-18","price":82.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under \/ Tang-and-Ferrule","offer_id":52801331724580,"sku":"LH-W014-48","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 6” \/ Tang-and-Ferrule","offer_id":52801331757348,"sku":"LH-W014-54","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 6” and 5’ 10” \/ Tang-and-Ferrule","offer_id":52801331790116,"sku":"LH-W014-60","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 10” and 6’ 2” \/ Tang-and-Ferrule","offer_id":52801331822884,"sku":"LH-W014-66","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 2” \/ Tang-and-Ferrule","offer_id":52801331855652,"sku":"LH-W014-72","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/abbott-weeder-18-inch-handle-three-quarter-view.jpg?v=1775928647"},{"product_id":"houseplant-cultivator-trowel","title":"Houseplant Cultivator Trowel","description":"This is a great little tool for doing your houseplants. You can loosen the soil with the fork end and add or take away soil from the pot with the trowel end. It's also great for taking small plant starts out of starter trays. It measures about 11 inches long.    ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801331921188,"sku":"CU-HP00","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/houseplant-cultivator-trowel-two-tine-back.jpg?v=1775928663"},{"product_id":"houseplant-cultivator","title":"Houseplant Cultivator","description":"This little tool is great for loosening the soil in your pots. It measures about 7 inches long. The head is about 2 inches long by 1 inch wide.  ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801332707620,"sku":"SR-HP01","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/houseplant-cultivator.jpg?v=1775928682"},{"product_id":"galvanized-potting-bench-scoop","title":"Galvanized Potting Bench Scoop","description":"\u003ch2\u003eA scoop designed for potting benches and other flat surfaces\u003c\/h2\u003eThere are plenty of scoops on the market, mostly plastic or aluminum and made for handling measures of grain, seed or soil amendments. Our scoop differs from the common one in that it is made with a wood handle and backpiece attached by brass nails to a galvanized steel trough. It's a 1-quart scoop. Moreover, the trough is flat-bottomed, not round, so it will pick up material off your potting bench or other flat surfaces; much in the manner of a dustpan. Round bottom scoops clear a 1\/2 inch path at best, where ours, clears one 4 inches wide. The trough is made of 12 ga. steel. The handle and the backplate are made of various hardwoods we have on hand. (our next door neighbor is a cabinet maker and gives us lots of usable hardwood of varying species.)                 ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801349746980,"sku":"CU-M004","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/potting-soil-scoop-galvanized-steel-top.jpg?v=1775928846"},{"product_id":"ridger-furrowing-plow","title":"Ridger (Furrowing Plow)","description":"\u003ch2\u003eThe right sized plow to furrow your garden plot\u003c\/h2\u003e\u003cdiv\u003eRidgers, also called furrowers or furrowing hoes, were once common on American Farms. Today they are used primarily by European smallholders and market gardeners. A ridger is a small middle-buster, i.e. a double faced plow on the end of a pole. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eTo use a ridger you walk backward pulling the tool through the prepared soil making a clean V-shaped furrow in a single pass. Soil is deposited well outside of the furrow so no repeated scratching is required. If you plant in the furrow bottom (potato's for example) you can flip the ridger over on its backside and walk forward, pushing it, to close the soil over your seeds. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eRidgers are used primarily in kitchen gardens and small plots. However, they also have a place in larger-scale farm work to straighten furrows spoiled by turning a tractor or livestock at each end of the field. Just a few more feet of useful row at the margins can add up to a lot more crop in the field. While ridgers are of limited use in raised beds, anyone growing in long rows will find them to be an excellent, time saving implement. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eOne note of clarification:\u003c\/span\u003e while our ridgers are sturdy, they are not intended for plowing to break up heavy compacted ground. You can use them to break light, sandy soils. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eA note on the sizes: \u003cspan style=\"font-weight: bold;\"\u003eSmall\u003c\/span\u003e is for tightly spaced rows and pulls a V-shaped furrow 2-4\" wide and deep. \u003cspan style=\"font-weight: bold;\"\u003eMedium (standard) \u003c\/span\u003eis the right ridger for the average garden with bigger plants. Our \u003cspan style=\"font-weight: bold;\"\u003elarge\u003c\/span\u003e makes a full, deep furrow in one pass. \u003cdiv\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cdiv\u003eThere are four ordering options: \u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003eChoose head size: small (same size as hand tool, 3-4\" wide), standard medium (slightly larger 5-7\" in width), large (typically 6-8\" in width). Custom head sizes available, please get in touch for more information.\u003c\/li\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003eChoose style of connection: forged solid socket (riveted) or tang-and-ferrule (riveted)\u003c\/li\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003eChoose a handle length based on your height or order the solid socket head with no handle.\u003c\/li\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003eHave us add a wood-and-metal YD-Grip to your ridger. It makes pulling and pushing the implement much easier and more efficient. The YD-Grip adds about 3-5 inches to the overall length. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"Default Title","offer_id":52801353580836,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/hand-ridgers-long-and-short-handles-hand-forged-garden-tool.jpg?v=1775928883"},{"product_id":"diamond-hoe-long-handle","title":"Diamond Hoe Long Handle","description":"\u003ch2\u003eAn efficient scuffle hoe with a long reach\u003c\/h2\u003e\n\u003cp\u003eThe Diamond Hoe, an excellent and versatile scuffle hoe, has been popular for many years in the Netherlands, and only more recently so here in the US. Sharpened on all four sides it is extremely efficient at slicing through weed roots just below the soil. This hoe is meant to be used early and often as annual and perennial weeds emerge. The pointed ends of the diamond can be used to flick out weeds that are close enough to any desirable plant don't want to nick.   \u003cbr\u003e\u003cbr\u003eThe standard small head is almost 6 inches wide, making it ideal for typically spaced garden plantings. The large 9 inch wide blade is more suited to wide open spaces where you have a lot of ground to cover. All of the hoe heads are welded to a forged shank and come standard with a riveted solid socket. Choose the tang-and-ferrule connection style for a slightly lighter tool. It is less durable over the long run, especially if you bear weight on the hoe, but is functionally the same and delivers the same combination of rapid coverage and precision. \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eYou may be interested in the \u003ca href=\"\/products\/diamond-hoe\" target=\"_blank\" rel=\"noopener\"\u003ehand tool\u003c\/a\u003e for up close garden work while squatting or sitting on the ground.\u003cspan class=\"s1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cbr\u003e\u003c\/span\u003eThere are three ordering options:\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eChoose a handle length based on your height or order the solid socket head with no handle.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eChoose style of connection: forged solid socket (riveted) or tang and ferrule (riveted)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\" style=\"margin: 0px; font-stretch: normal; line-height: normal;\"\u003e\n\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003eChoose head size: standard small (same size as hand tool, 5 1\/2 to 6\" wide), standard medium (slightly larger 7\" in width, less common), standard large (typically 9\" in width). Custom head sizes available, please get in touch for more information.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe size, shape, and weight of a long handled tool means we must charge an additional $15 shipping fee per tool to our flat rate shipping rate to accommodate for the actual cost of shipping it. Tools that are both long and wide can be quite expensive to ship.\u003c\/p\u003e","brand":"Red Pig Tools","offers":[{"title":"Head Only with Solid Socket- No Handle \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801356562724,"sku":"LH-H001-HO","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Head Only with Solid Socket- No Handle \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801356595492,"sku":"LH-H001-HO","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Head Only with Solid Socket- No Handle \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801356628260,"sku":"LH-H001-HO","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Head Only with Solid Socket- No Handle \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801356661028,"sku":"LH-H001-HO","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Head Only with Solid Socket- No Handle \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801356693796,"sku":"LH-H001-HO","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Head Only with Solid Socket- No Handle \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801356726564,"sku":"LH-H001-HO","price":80.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801356759332,"sku":"LH-H001-18","price":100.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801356792100,"sku":"LH-H001-18","price":100.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801356824868,"sku":"LH-H001-18","price":110.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801356857636,"sku":"LH-H001-18","price":75.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801356890404,"sku":"LH-H001-18","price":75.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801356923172,"sku":"LH-H001-18","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under (48\" handle) \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801356955940,"sku":"LH-H001-48","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under (48\" handle) \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801356988708,"sku":"LH-H001-48","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under (48\" handle) \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357021476,"sku":"LH-H001-48","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under (48\" handle) \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801357054244,"sku":"LH-H001-48","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under (48\" handle) \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357087012,"sku":"LH-H001-48","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under (48\" handle) \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357119780,"sku":"LH-H001-48","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 7” (54\" handle) \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801357152548,"sku":"LH-H001-54","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 7” (54\" handle) \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357185316,"sku":"LH-H001-54","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 7” (54\" handle) \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357218084,"sku":"LH-H001-54","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 7” (54\" handle) \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801357250852,"sku":"LH-H001-54","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 7” (54\" handle) \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357283620,"sku":"LH-H001-54","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 7” (54\" handle) \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357316388,"sku":"LH-H001-54","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 7” and 5’ 11” (60\" handle \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801357349156,"sku":"LH-H001-60","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 7” and 5’ 11” (60\" handle \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357381924,"sku":"LH-H001-60","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 7” and 5’ 11” (60\" handle \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357414692,"sku":"LH-H001-60","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 7” and 5’ 11” (60\" handle \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801357447460,"sku":"LH-H001-60","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 7” and 5’ 11” (60\" handle \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357480228,"sku":"LH-H001-60","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 7” and 5’ 11” (60\" handle \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357512996,"sku":"LH-H001-60","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 11” and 6’ 3” (66\" handle) \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801357545764,"sku":"LH-H001-66","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 11” and 6’ 3” (66\" handle) \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357578532,"sku":"LH-H001-66","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 11” and 6’ 3” (66\" handle) \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357611300,"sku":"LH-H001-66","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 11” and 6’ 3” (66\" handle) \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801357644068,"sku":"LH-H001-66","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 11” and 6’ 3” (66\" handle) \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357676836,"sku":"LH-H001-66","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 11” and 6’ 3” (66\" handle) \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357709604,"sku":"LH-H001-66","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 3” (72\" handle) \/ Solid Socket \/ Standard (or as listed above)","offer_id":52801357742372,"sku":"LH-H001-72","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 3” (72\" handle) \/ Solid Socket \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357775140,"sku":"LH-H001-72","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 3” (72\" handle) \/ Solid Socket \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357807908,"sku":"LH-H001-72","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 3” (72\" handle) \/ Tang-and-Ferrule \/ Standard (or as listed above)","offer_id":52801357840676,"sku":"LH-H001-72","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 3” (72\" handle) \/ Tang-and-Ferrule \/ Small (Varies by Tool, 2\"-5.5\")","offer_id":52801357873444,"sku":"LH-H001-72","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 3” (72\" handle) \/ Tang-and-Ferrule \/ Large  (Varies by Tool - Size varies, 8\"+)","offer_id":52801357906212,"sku":"LH-H001-72","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/diamond-hoe-solid-socket-long-handle.jpg?v=1775929011"},{"product_id":"crevice-weeder-long-handle","title":"Crevice Weeder Long Handle","description":"\u003ch2\u003eA patio owner's best friend\u003c\/h2\u003e\u003cdiv\u003eOf all weeding tasks, by far the hardest is removing weeds from crevices. Weed seeds find their way into every nook and cranny and thrive on what little nutrients they find there. Some crevices are irregular--wall chinks for example, stress cracks in concrete sidewalks, gaps between irregularly shaped pavers. Most are straight seams between bricks or the boards of a deck, expansion joints in concrete work, the juncture of sidewalks or driveways with curbs. In worst cases, where the cracks are minute and irregular and will absolutely not yield, you have to resort to chemical weeding, repeated spraying with vinegar, or a propane torch. However, in most cases our long handled Crevice Weeder will extricate the weeds handily with no bending over and a modicum of cursing. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe head of the tool is forged from a single rod of 1\/2 inch thick steel. The shank is flattened on its sides giving it an oval cross section for greater strength in the direction where the prying force is applied. The back section is hammered into a curved, 1\/16 inch thick, pointed crescent that is along most of its length. The narrow edges of the blade are ground flat, rather than to a knife edge. This is done so that the weed roots are extracted instead of being cut off and left to continue growing. Because the blade is hammered all the way from hot to cold, it is work hardened--made hard enough to hold its edges-- but remains malleable enough to bend without breaking, unless severely abused. \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe most common handle length for this tool is 54 inches. However, as with all of our long-handled tools, choose from the personalized drop down menu to choose the handle length that best suits your height and use.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003eThe size, shape, and weight of a long handled tool means we must charge an additional $15 shipping fee per tool to our flat rate shipping rate to accommodate for the actual cost of shipping it. Tools that are both long and wide can be quite expensive to ship. \u003c\/div\u003e ","brand":"Red Pig Tools","offers":[{"title":"18” Handle \/ Solid Socket","offer_id":52801358037284,"sku":"LH-S021-18","price":92.0,"currency_code":"USD","in_stock":true},{"title":"18” Handle \/ Tang-and-Ferrule","offer_id":52801358070052,"sku":"LH-S021-18","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under \/ Solid Socket","offer_id":52801358102820,"sku":"LH-S021-48","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners 5’ 2” and under \/ Tang-and-Ferrule","offer_id":52801358135588,"sku":"LH-S021-48","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 6” \/ Solid Socket","offer_id":52801358168356,"sku":"LH-S021-54","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 2” and 5’ 6” \/ Tang-and-Ferrule","offer_id":52801358201124,"sku":"LH-S021-54","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 6” and 5’ 10” \/ Solid Socket","offer_id":52801358233892,"sku":"LH-S021-60","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 6” and 5’ 10” \/ Tang-and-Ferrule","offer_id":52801358266660,"sku":"LH-S021-60","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 10” and 6’ 2” \/ Solid Socket","offer_id":52801358299428,"sku":"LH-S021-66","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners between 5’ 10” and 6’ 2” \/ Tang-and-Ferrule","offer_id":52801358332196,"sku":"LH-S021-66","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 2” \/ Solid Socket","offer_id":52801358364964,"sku":"LH-S021-72","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Handle for Gardeners over 6’ 2” \/ Tang-and-Ferrule","offer_id":52801358397732,"sku":"LH-S021-72","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0893\/5204\/files\/crevice-weeder-long-handle-side-view_777d95a6-3781-487e-b7f6-a25f976da3d9.jpg?v=1775929028"}],"url":"https:\/\/redpigtools.com\/collections\/red-pig-originals.oembed","provider":"Red Pig Garden Tools","version":"1.0","type":"link"}